Lancer Nation

Honesty Always Welcomed!
 
Lancer NationLancer Nation  HomeHome  FAQFAQ  RegisterRegister  Log inLog in  

Share | 
 

 light crank pulley

View previous topic View next topic Go down 
AuthorMessage
nofear1979
Member
avatar

Number of posts : 199
Vehicle Type : Lancer GT, 2009 Model
Registration date : 2010-03-18

PostSubject: light crank pulley   Sat Apr 03, 2010 12:25 pm

has anyone try this??
will void warranty??
Back to top Go down
sk18
Member
avatar

Number of posts : 140
Vehicle Type : Lancer GT
Registration date : 2009-10-26

PostSubject: Re: light crank pulley   Sat Apr 03, 2010 4:41 pm

Hi nofear1979.

I had installed a LCP to my GT. However, it caused the belt to rotate in a non-balanced manner and making loud swishing sound. Even when changed to another LC, the same swishing sound can be heard.

Other members did install similar make of LCP and did not experience such bad experience.

So, it is up to your luck.
Back to top Go down
nofear1979
Member
avatar

Number of posts : 199
Vehicle Type : Lancer GT, 2009 Model
Registration date : 2010-03-18

PostSubject: Re: light crank pulley   Sat Apr 03, 2010 6:15 pm

sk18 wrote:
Hi nofear1979.

I had installed a LCP to my GT. However, it caused the belt to rotate in a non-balanced manner and making loud swishing sound. Even when changed to another LC, the same swishing sound can be heard.

Other members did install similar make of LCP and did not experience such bad experience.

So, it is up to your luck.

oh i see... very bad o.. if very noisy... i installed before to my ex-waja.. pickup/rev very fast... so would like to try on LGT.

but to do this.. i am sure it will void my warranty already right?
Back to top Go down
Elan
Member
avatar

Number of posts : 534
Vehicle Type : Lancer GT
Registration date : 2010-03-02

PostSubject: Re: light crank pulley   Sun Apr 04, 2010 2:53 am

i'm with alutec LCP for more than a year already.. so far no prob.
Back to top Go down
sk18
Member
avatar

Number of posts : 140
Vehicle Type : Lancer GT
Registration date : 2009-10-26

PostSubject: Re: light crank pulley   Sun Apr 04, 2010 9:05 am

Hi Nofear1979.

This mod is more like a plug-and-play. Try out a LCP of your choice and see how you like it (or more like whether your Lancer likes it or not !). Your butt will tell you that the initial pickup is better. If there is no problem, then it is OK. If there is a problem, you can remove it and your service centre will not know (hopefully)
Back to top Go down
nofear1979
Member
avatar

Number of posts : 199
Vehicle Type : Lancer GT, 2009 Model
Registration date : 2010-03-18

PostSubject: Re: light crank pulley   Sun Apr 04, 2010 1:15 pm

sk18 wrote:
Hi Nofear1979.

This mod is more like a plug-and-play. Try out a LCP of your choice and see how you like it (or more like whether your Lancer likes it or not !). Your butt will tell you that the initial pickup is better. If there is no problem, then it is OK. If there is a problem, you can remove it and your service centre will not know (hopefully)

important things is, dun throw away stock Crank pulley.. hahahaha
Back to top Go down
gelygeleman
Member
avatar

Number of posts : 900
Vehicle Type : Mitsubishi Lancer GT
Registration date : 2010-03-03

PostSubject: Re: light crank pulley   Mon Apr 05, 2010 1:27 am

try alutec.. its taiwan made. im also not having any prob with it for more than a year ady.
this mod sure will void ur warranty.

to b a modder, dun talk about warranty lar bro..
Back to top Go down
gelygeleman
Member
avatar

Number of posts : 900
Vehicle Type : Mitsubishi Lancer GT
Registration date : 2010-03-03

PostSubject: Re: light crank pulley   Tue Apr 06, 2010 2:31 am

its Alutec.. good LCP brand

Back to top Go down
Elan
Member
avatar

Number of posts : 534
Vehicle Type : Lancer GT
Registration date : 2010-03-02

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 12:39 am

alutec is widely used in sg..
Back to top Go down
gelygeleman
Member
avatar

Number of posts : 900
Vehicle Type : Mitsubishi Lancer GT
Registration date : 2010-03-03

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 2:23 am

alutec is special design for mitsubishi lancer fortis in Japan
Back to top Go down
nofear1979
Member
avatar

Number of posts : 199
Vehicle Type : Lancer GT, 2009 Model
Registration date : 2010-03-18

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 3:05 am

gelygeleman wrote:
alutec is special design for mitsubishi lancer fortis in Japan

i seeee... heard before... but never really saw it..... i knew there is another brand... mythelogy...
Back to top Go down
gelygeleman
Member
avatar

Number of posts : 900
Vehicle Type : Mitsubishi Lancer GT
Registration date : 2010-03-03

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 3:16 am

myth was local made. same as GAB.
local made car use local made part.

CBU car should use imported parts to maintain the originality full imported car. thats y we bought CBU, not local.
Back to top Go down
Scissorshand
Member
avatar

Number of posts : 255
Vehicle Type : Lancer GT
Registration date : 2009-11-03

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 9:12 am

GG, wah!!!!!!!!! i feel hurt..............sob,sob............

Coz my CBU car uses Myth LCP wor.................. sob, sob
Back to top Go down
Reverend
Admin
avatar

Number of posts : 355
Vehicle Type : Lansi
Registration date : 2009-09-08

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 12:53 pm

When I first installed the Mythelogy LCP, it felt really good... the pickup was slightly better and throttle response also seem less laggy. Another advantage of LCPs (in general) is that it reduces the load on the alternator, altho' I have no idea how this is translated into real world experiences.

However, the thing is that after I had removed (=sold) my LCP, I didn't miss it at all... go figure... I dunno... ...
Back to top Go down
nofear1979
Member
avatar

Number of posts : 199
Vehicle Type : Lancer GT, 2009 Model
Registration date : 2010-03-18

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 5:06 pm

Reverend wrote:
When I first installed the Mythelogy LCP, it felt really good... the pickup was slightly better and throttle response also seem less laggy. Another advantage of LCPs (in general) is that it reduces the load on the alternator, altho' I have no idea how this is translated into real world experiences.

However, the thing is that after I had removed (=sold) my LCP, I didn't miss it at all... go figure... I dunno... ...


o.. why remove it?????
Back to top Go down
gelygeleman
Member
avatar

Number of posts : 900
Vehicle Type : Mitsubishi Lancer GT
Registration date : 2010-03-03

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 7:00 pm

haha.. sory scissors.. the word come from my heart. anywy LCP was good mod.

rev moved his lcp without miss it coz his ecu driven by unichipQ+
Back to top Go down
Reverend
Admin
avatar

Number of posts : 355
Vehicle Type : Lansi
Registration date : 2009-09-08

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 7:05 pm

nofear1979 wrote:

o.. why remove it?????
Actually I removed quite a few items from my Lancer already coz I had been anticipating selling the Lancer... but until now my plans is kinda put on hold...

Oh and GG, when I bought my Unichip, only got version Q la, don't have Q+ yet la waaay back then Smile
Back to top Go down
Elan
Member
avatar

Number of posts : 534
Vehicle Type : Lancer GT
Registration date : 2010-03-02

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 8:27 pm

bro rev, unichip Q can be upgraded to Q+
its only the software inside it. Q+ got extra parameter controls for turbo cars.. for N.A. cars like us, no difference within version Q and Q+.
Back to top Go down
Scissorshand
Member
avatar

Number of posts : 255
Vehicle Type : Lancer GT
Registration date : 2009-11-03

PostSubject: Re: light crank pulley   Wed Apr 07, 2010 10:58 pm

No worries, we're all monkeying around here............ i'm happy with mine so far, no prob too Very Happy
Back to top Go down
Fuza
Member
avatar

Number of posts : 556
Vehicle Type : LGT 2.0, white
Registration date : 2010-05-17

PostSubject: Re: light crank pulley   Tue Jul 13, 2010 10:25 pm

need list of light weight crank pulley.. ada bnyk ke??
Back to top Go down
Elan
Member
avatar

Number of posts : 534
Vehicle Type : Lancer GT
Registration date : 2010-03-02

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 12:08 pm

there are many brands outside there.. go for alutec or gdl.
Back to top Go down
Fuza
Member
avatar

Number of posts : 556
Vehicle Type : LGT 2.0, white
Registration date : 2010-05-17

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 2:39 pm

Price + installation?
Back to top Go down
Elan
Member
avatar

Number of posts : 534
Vehicle Type : Lancer GT
Registration date : 2010-03-02

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 2:54 pm

alutec in sg is around sgd250 now, GDL RM400+..
Back to top Go down
nofear1979
Member
avatar

Number of posts : 199
Vehicle Type : Lancer GT, 2009 Model
Registration date : 2010-03-18

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 6:08 pm

Elan wrote:
alutec in sg is around sgd250 now, GDL RM400+..

bro GDL also from taiwan??? never heard before oo...
Back to top Go down
gelygeleman
Member
avatar

Number of posts : 900
Vehicle Type : Mitsubishi Lancer GT
Registration date : 2010-03-03

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 6:42 pm

alutec fan
Back to top Go down
Fuza
Member
avatar

Number of posts : 556
Vehicle Type : LGT 2.0, white
Registration date : 2010-05-17

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 6:50 pm

Taiwan made eh???
Back to top Go down
nofear1979
Member
avatar

Number of posts : 199
Vehicle Type : Lancer GT, 2009 Model
Registration date : 2010-03-18

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 6:51 pm

i check from the website.. only from taiwan....
Back to top Go down
Elan
Member
avatar

Number of posts : 534
Vehicle Type : Lancer GT
Registration date : 2010-03-02

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 8:35 pm

both alutec and gdl are made in taiwan.. link for GDL HERE
Back to top Go down
rainbow penang
Member


Number of posts : 45
Vehicle Type : lancer gt
Registration date : 2010-05-22

PostSubject: Re: light crank pulley   Wed Jul 14, 2010 11:28 pm

BANG AKU BOLEH JUAL MEMBER PRICE MURAH MURAH
Back to top Go down
Fuza
Member
avatar

Number of posts : 556
Vehicle Type : LGT 2.0, white
Registration date : 2010-05-17

PostSubject: Re: light crank pulley   Thu Jul 15, 2010 12:16 am

Murah2 brape lambo? Apa brand.. Aku tau.. You mmg taiwan punya kaki..
Back to top Go down
Elan
Member
avatar

Number of posts : 534
Vehicle Type : Lancer GT
Registration date : 2010-03-02

PostSubject: Re: light crank pulley   Thu Jul 15, 2010 9:39 am

taiwan ok.. R&D taiwan bagus.. jgn china..
Back to top Go down
Sponsored content




PostSubject: Re: light crank pulley   

Back to top Go down
 
light crank pulley
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» wtb 4ac crank pulley asap
» Cheap Crank pulley
» MSD LS1 2step. SUmmit underdrive pulley
» Can't remove crankshaft pulley on '99 hijet
» LF:F body accessories alt,ps,crank pulley,water pump,lsx maf.

Permissions in this forum:You cannot reply to topics in this forum
Lancer Nation :: Lancer Nation Garage :: 9th Generation Lancer :: Engine/Drivetrain : Engine, Transmission and Performance-
Jump to: